UVB TECHNIK s.r.o.

Ostravska 79 A, 748 01 Hlucin
Czechia

Telephone +420 595044444
Fax +420 595044700
sales@uvbtechnik.cz

Location

Hall map

METEC 2015 hall map (Hall 4): stand A37

Fairground map

METEC 2015 fairground map: Hall 4

Contact

Lucie Huláková

Employee
Marketing, sales, advertising, PR

Czechia

Phone
+420 59 5044444

Email
lucie.hulakova@uvbtechnik.cz

Visit us

Hall 4 / A37

16.06.2015

Topic

Download

all-day

We will exhibit: Strip thickness gauge Strip profile gauge Wiping/Cleaning equipment Shapemeter - NEW!!! Automatic detection of strip defects Scanner of car position for coking plants

More Less

17.06.2015

Topic

Download

all-day

We will exhibit: Strip thickness gauge Strip profile gauge Wiping/Cleaning equipment Shapemeter - NEW!!! Automatic detection of strip defects Scanner of car position for coking plants

More Less

18.06.2015

Topic

Download

all-day

We will exhibit: Strip thickness gauge Strip profile gauge Wiping/Cleaning equipment Shapemeter - NEW!!! Automatic detection of strip defects Scanner of car position for coking plants

More Less

19.06.2015

Topic

Download

all-day

We will exhibit: Strip thickness gauge Strip profile gauge Wiping/Cleaning equipment Shapemeter - NEW!!! Automatic detection of strip defects Scanner of car position for coking plants

More Less

20.06.2015

Topic

Download

all-day

We will exhibit: Strip thickness gauge Strip profile gauge Wiping/Cleaning equipment Shapemeter - NEW!!! Automatic detection of strip defects Scanner of car position for coking plants

More Less

Our range of products

Product categories

  • 01  Plant and equipment for processing prime and raw materials
  • 01.07  Coke oven plants
  • 10  Electrical engineering and process control technology
  • 10.02  Process control technology and automation
  • 11  Measurement and test technology
  • 11.01  Measurement of physical properties and quantities
  • 11  Measurement and test technology
  • 11.04  Analysis and laboratory equipment

Our products

Product category: Coke oven plants

Positioning system for coking plant machines

  • The systeme is designed for accurate command guidance and positioning of Coke Oven "rail cars" (charging; pushing; leading; fire fighting; quenching or wharf and maintenance cars) to individual coke oven chambers.
  • References: ARCELORMITTAL Ostrava a.s., OKK Koksovny a.s., US STEEL Košice, SIEMENS Czech Republic, ARCELORMITTAL Zenica, KARDEMIR

More Less

Product category: Process control technology and automation

Strip thickness gauge for rolling mills

  • Continuous measuring of metal strip thickness by means of two opposite sensors with diamond contacts located in a floating head
  • Digital display of absolute thickness in micrometers as well as the deviation from the nominal desired thickness
  • 5 years guarantee on the diamond contacts
  • Single measuring range 0,03 -9 mm (to 20 mm) without any adjustment
  • Accuracy: ± 1 μm (thickness < 2 mm); ± 2 μm (thickness > 2 mm)
  • Simple control value 0,000 mm on display after every measuring of metal strip thickness
  • No mark on the strip surface

More Less

Product category: Process control technology and automation

Flatness control – Shapemeter

  • Designed to measure tensile force and thus the flatness of the strip running over the width of a roller divided into individual measuring sections.

More Less

Product category: Process control technology and automation

Automatic detection of strip defects

  • Computer analysis of the strip surface online inspected by CCD cameras

More Less

Product category: Measurement of physical properties and quantities

Wiping/cleaning equipment

  • Wiping / cleaning of the oil and emulsion from the surface of metal strip
  • Two pairs of opposite wiping polyurethane slats fastened in holders mounted on floating frames enabling adaption of the wiping slats to the movement of the rolled strip
  • Drying / cleaning of the rolled strip is increased by compressed air between wiping slats
  • Continuous regulation of the closing force using pneumatic cylinders

More Less

Product category: Measurement of physical properties and quantities

Strip thickness gauge for rolling mills

  • Continuous measuring of metal strip thickness by means of two opposite sensors with diamond contacts located in a floating head
  • Digital display of absolute thickness in micrometers as well as the deviation from the nominal desired thickness
  • 5 years guarantee on the diamond contacts
  • Single measuring range 0,03 -9 mm (to 20 mm) without any adjustment
  • Accuracy: ± 1 μm (thickness < 2 mm); ± 2 μm (thickness > 2 mm)
  • Simple control value 0,000 mm on display after every measuring of metal strip thickness
  • No mark on the strip surface

More Less

Product category: Measurement of physical properties and quantities

Strip profile gauge

  • Laboratory measuring of the thickness profile on a cut-out sample of the strip
  • Accuracy: ± 1 μm
  • 1 measurement / 1 mm of the strip width

More Less

Product category: Measurement of physical properties and quantities

Flatness control – Shapemeter

  • Designed to measure tensile force and thus the flatness of the strip running over the width of a roller divided into individual measuring sections.

More Less

Product category: Quality control

Wiping/cleaning equipment

  • Wiping / cleaning of the oil and emulsion from the surface of metal strip
  • Two pairs of opposite wiping polyurethane slats fastened in holders mounted on floating frames enabling adaption of the wiping slats to the movement of the rolled strip
  • Drying of the rolled strip is increased by compressed air between wiping slats
  • Continuous regulation of the closing force using pneumatic cylinders

More Less

Product category: Quality control

Strip thickness gauge for rolling mills

  • Continuous measuring of metal strip thickness by means of two opposite sensors with diamond contacts located in a floating head
  • Digital display of absolute thickness in micrometers as well as the deviation from the nominal desired thickness
  • 5 years guarantee on the diamond contacts
  • Single measuring range 0,03 -9 mm (to 20 mm) without any adjustment
  • Accuracy: ± 1 μm (thickness < 2 mm); ± 2 μm (thickness > 2 mm)
  • Simple control value 0,000 mm on display after every measuring of metal strip thickness
  • No mark on the strip surface

More Less

Product category: Quality control

Strip profile gauge

  • Laboratory measuring of the thickness profile on a cut-out sample of the strip
  • Accuracy: ± 1 μm
  • 1 measurement / 1 mm of the strip width

More Less

Product category: Quality control

Flatness control – Shapemeter

  • Designed to measure tensile force and thus the flatness of the strip running over the width of a roller divided into individual measuring sections.

More Less

Product category: Quality control

Automatic detection of strip defects

  • Computer analysis of the strip surface online inspected by CCD cameras

More Less

Product category: Analysis and laboratory equipment

Strip thickness gauge for rolling mills

  • Continuous measuring of metal strip thickness by means of two opposite sensors with diamond contacts located in a floating head
  • Digital display of absolute thickness in micrometers as well as the deviation from the nominal desired thickness
  • 5 years guarantee on the diamond contacts
  • Single measuring range 0,03 -9 mm (to 20 mm) without any adjustmentAccuracy: ± 1 μm (thickness < 2 mm); ± 2 μm (thickness > 2 mm)
  • Simple control value 0,000 mm on display after every measuring of metal strip thickness
  • No mark on the strip surface

More Less

Product category: Analysis and laboratory equipment

Strip profile gauge

  • Laboratory measuring of the thickness profile on a cut-out sample of the strip
  • Accuracy: ± 1 μm
  • 1 measurement / 1 mm of the strip width

More Less

About us

Company details

UVB TECHNIK s.r.o. is the producer of high precision continuous strip thickness gauges, strip profile gauges, wiping/cleaning equipments, flatness control and automatic detection of strip defects, etc.

For over 20 years UVB TECHNIK has been successfully supplying measuring and cleaning equipments mainly to cold rolling mills as well as to other processing lines such as cleaning lines, slitting lines, levelling lines, strip edge trimming lines, etc.

Our company has multiple references across the world, among which we would like to highlight the following: Jindal Stainless, ArcelorMittal, Thyssen Krupp Electrical Steel, Voestalpine Stahl, MINO, Wickeder Westfalenstahl, Bandstahl Schulte, SOTYL, Lucas-Milhaupt, Compania Valenciana de Aluminio, The Royal Mint, U.S. Steel, El Zinc – Asturiana de Laminados, Nippon Cross Rolling, Osaka Heat Treatment, Aciers Coste, Cinkarna and many more.

Positioning system for coking plant machines

UVB TECHNIK is also specialised in production of Positioning system for coking plant machines.

The system is designed for accurate command guidance and positioning of Coke Oven "rail cars" (charging, pushing, leading, fire fighting, quenching cars etc.) to individual coke oven chambers.

References: ARCELORMITTAL Ostrava a.s., OKK Koksovny a.s., US STEEL Košice, SIEMENS Czech Republic, ARCELORMITTAL Zenica, KARDEMIR.

UVB TECHNIK s.r.o. spends 10 % of the total turnover per calendar year for applied research that results in development new products to meet customers´ requirements.

More Less