Rump Strahlanlagen GmbH & Co. KG
Berglar 27,
33154
Salzkotten
Germany
Germany
Location
Hall map
Fairground map
Our range of products
Product categories
- 11 Knock-out, fettling and finishing
- 11.02 Blasting plant and accessories
- 11.02.02 Airless shot-blasting machines
Airless shot-blasting machines
Our products
Product category: Airless shot-blasting machines
Overhead monorail machines
Type CAPSOR®: Infeed procedure
For all-round, automatic shotblasting of individual workpieces or those attached to a transport rack in batch processing by means of blast wheel technology. Attachment occurs on an overhead monorail system with carriage or lifting gear. The cluster of workpieces rotates and oscillates in the blast area during the blasting process.
Type LINEXA®: Run-through process
For shotblasting of profile constructions and other components and also for sweeping galvanized workpieces in continuous operation by means of blast wheel technology.
Attachment occurs on crossbars of a manual overhead rail system, a Power & Free conveyor system or a circle monorail conveyor system, for heavy loads also with electric hoists.
For all-round, automatic shotblasting of individual workpieces or those attached to a transport rack in batch processing by means of blast wheel technology. Attachment occurs on an overhead monorail system with carriage or lifting gear. The cluster of workpieces rotates and oscillates in the blast area during the blasting process.
Type LINEXA®: Run-through process
For shotblasting of profile constructions and other components and also for sweeping galvanized workpieces in continuous operation by means of blast wheel technology.
Attachment occurs on crossbars of a manual overhead rail system, a Power & Free conveyor system or a circle monorail conveyor system, for heavy loads also with electric hoists.
Product category: Airless shot-blasting machines
Tumble machines
Type CUBESTA®
Rubber belt tumble machines
These machines are suitable for the automatic shotblasting of tumble-proof casted, forged, stamped and flame-cut parts in batch operation as well as for the surface hardening of springs.
The tumble belt is made of perforated rubber with supporting tissue. Depending on the model, it is suitable for load weights up to 20 or 30 kg.
The parts are either loaded manually or with a hydraulic tilting device out of a transport container onto the belt and are continuously circulated during the blasting process. After the blasting, the discharge of the workpieces takes place by a changeover of the conveying direction of the tumble belt. In that case, the workpieces are dropped onto an additional discharge belt, a vibrating conveyor channel or also directly into an underneath transport container.
Steel belt tumble machines
These machines are suitable for the automatic shotblasting of tumble-proof casted, forged, stamped and flame-ut parts in batch operation.
The tumble belt consists of high wear resistant manganese hard steel plates and cast chain links. Depending on the model, it is suitable for load weights up to 125 or 200 kg.
The parts are loaded from a transport container onto the belt by means of a hydraulic tilting device and are continuously circulated during the blasting process. After the blasting, the discharge of the workpieces takes place by a changeover of the conveying direction of the tumble belt. In that case, the workpieces are dropped onto an additional discharge belt, a vibrating conveyor channel or also directly into an underneath transport container.
Rubber belt tumble machines
These machines are suitable for the automatic shotblasting of tumble-proof casted, forged, stamped and flame-cut parts in batch operation as well as for the surface hardening of springs.
The tumble belt is made of perforated rubber with supporting tissue. Depending on the model, it is suitable for load weights up to 20 or 30 kg.
The parts are either loaded manually or with a hydraulic tilting device out of a transport container onto the belt and are continuously circulated during the blasting process. After the blasting, the discharge of the workpieces takes place by a changeover of the conveying direction of the tumble belt. In that case, the workpieces are dropped onto an additional discharge belt, a vibrating conveyor channel or also directly into an underneath transport container.
Steel belt tumble machines
These machines are suitable for the automatic shotblasting of tumble-proof casted, forged, stamped and flame-ut parts in batch operation.
The tumble belt consists of high wear resistant manganese hard steel plates and cast chain links. Depending on the model, it is suitable for load weights up to 125 or 200 kg.
The parts are loaded from a transport container onto the belt by means of a hydraulic tilting device and are continuously circulated during the blasting process. After the blasting, the discharge of the workpieces takes place by a changeover of the conveying direction of the tumble belt. In that case, the workpieces are dropped onto an additional discharge belt, a vibrating conveyor channel or also directly into an underneath transport container.
Product category: Airless shot-blasting machines
Wire belt machines
The machines are designed for shotblasting of sensitive workpieces or those not suited to roller conveyors in continuous operation. They were originally developed for shotblasting thin-walled and impact sensitive furnace and cast iron sewerage ware and radiators, but aluminium die castings as well as flame cutting parts and constructions can also be processed with these machines.
The workpieces are guided through the effective range of the shotblast wheels on a wire belt.
The workpieces are guided through the effective range of the shotblast wheels on a wire belt.
About us
Company details
What is behind RUMP STRAHLANLAGEN?
Behind the brand RUMP STRAHLANLAGEN is the family business RUMP STRAHLANLAGEN GmbH & Co. KG, established by Konrad Rump in 1969 in Salzkotten, Germany and now run by his son-in-law Marcel Adriano.
With more than 48 years experience in the field of shotblasting and surface technology, RUMP STRAHLANLAGEN provides high quality and safety for various sectors and their requirements.
Behind the brand RUMP STRAHLANLAGEN is the family business RUMP STRAHLANLAGEN GmbH & Co. KG, established by Konrad Rump in 1969 in Salzkotten, Germany and now run by his son-in-law Marcel Adriano.
With more than 48 years experience in the field of shotblasting and surface technology, RUMP STRAHLANLAGEN provides high quality and safety for various sectors and their requirements.