Winoa Deutschland GmbH

High-productivity grit for desanding operations
High Performance Grit is a steel grit specially designed to improve shot blasting performance in foundries and forges. It works faster and last longer. Its capacity for removing and cleaning sands, resins or scale is unequalled.

USERS BENEFITS

#1 Efficiency : Optimum solution for wheel blasting machines
Higher cleaning efficiency on external parts.
Higher cleaning efficiency of internal surfaces with smaller holes and geometry details.
Controlled and consistent surface profile.
Thanks to its higher efficiency and resistance, HPG can, in numerous cases, be used with higher than standard throwing speeds (90 m/s or above) in order to treat difficult parts or areas that cannot be correctly cleaned with standard shot.

#2 Performance : Reduce the unit cost of your blasting process by 15%
Increasing your productivity by 10%
Decreasing your blasting time by 10%
Lowering your energy consumption by 30%
Reducing your abrasive consumption by 10%

Enhance your blocks by improving your performance through a finer granite cutting
AG0 is a fine steel grit dedicated to granite cutting on gang-saws. It reduces the space between 2 slabs by at least 1 mm. Result: more slabs with the same granite block. 

USERS BENEFITS 
 
#1 Performance : AG0 boost your productivity
Granite block use ratio (m2/m3) at 2 cm : + 3% 
Granite slab polishing : -7%
 
#2 Profitability : reducing consumable cost
Steel grit consumption (kg/m2) : -5%
Electricity consumption : -3,7%
Blade attrition : -8,8 % 
Lime consumption : -12,8 % 
Waste production : -12,8% 

COSMOS is the solution for granite producers eager to improve their performance, including hard granite
COSMOS combines fine steel grit with a special equipment. The fine grit improves the performance of cutting operations. The material recycles the active shot, excludes worn grit, prevents the formation of black mixture and allows to address hard granite cutting.

USERS BENEFITS 
 
#1 Productivity 
Two more 20 mm slabs for every m3 of granite.
Useful cutting width reduced from 30 mm to 28 mm.
Equipment rental for more productivity.
 
#2 Quality
Slab appearance: smoother and leaner.
 
#3 Profitability
Savings on energy and grit consumption, overall cutting process.
 
#4 Environment-friendly
10% reduction in waste.