Hindenlang GmbH
Neurott 1,
74931
Lobbach
Germany
Germany
Location
Hall map
Fairground map
Contact
Peter Neckermann
Our range of products
Product categories
- 02 Melting shop
- 02.02 Electric melting and holding furnaces (pouring equipment see 10.01)
- 02.02.04 Melting and holding furnaces, electric resistance type
Melting and holding furnaces, electric resistance type
- 02 Melting shop
- 02.02 Electric melting and holding furnaces (pouring equipment see 10.01)
- 02.02.07 Bale-out furnaces, electric
Bale-out furnaces, electric
- 02 Melting shop
- 02.02 Electric melting and holding furnaces (pouring equipment see 10.01)
- 02.02.09 Other electric melting and holding furnaces
Other electric melting and holding furnaces
- 02 Melting shop
- 02.03 Fuel-heated melting and holding furnaces
- 02.03.01 Crucible melting and holding furnaces, fuel-heated
Crucible melting and holding furnaces, fuel-heated
- 02 Melting shop
- 02.03 Fuel-heated melting and holding furnaces
- 02.03.04 Bale-out furnaces, fuel-heated
Bale-out furnaces, fuel-heated
- 02 Melting shop
- 02.03 Fuel-heated melting and holding furnaces
- 02.03.05 Melting and holding furnaces, fuel heated
Melting and holding furnaces, fuel heated
- 02 Melting shop
- 02.04 Auxiliary melting and melt processing facilities
- 02.04.10 Melt treatment stations
Melt treatment stations
- 02 Melting shop
- 02.04 Auxiliary melting and melt processing facilities
- 02.04.13 Vacuum degassing equipment
Vacuum degassing equipment
- 02 Melting shop
- 02.05 Melting and holding furnaces, accessories
- 02.05.03 Heating wires and heating bars for electric resistance type furnaces
Heating wires and heating bars for electric resistance type furnaces
- 10 Casting machines and pouring equipment
- 10.01 Pouring equipment
- 10.01.06 Pig casting machines
Pig casting machines
- 10 Casting machines and pouring equipment
- 10.01 Pouring equipment
- 10.01.07 Pouring equipment and plants, other
Pouring equipment and plants, other
- 10 Casting machines and pouring equipment
- 10.03 Peripheral equipment and auxiliary materials for die casting (die casting dies see 17.03.01)
- 10.03.09 Ascension pipes for dosing installations and low pressure casting
Ascension pipes for dosing installations and low pressure casting
- 10 Casting machines and pouring equipment
- 10.03 Peripheral equipment and auxiliary materials for die casting (die casting dies see 17.03.01)
- 10.03.10 Other accessories for die-casting
Other accessories for die-casting
- 14 Heat treating and drying furnaces
- 14.01 Mould and ladle dryers
Mould and ladle dryers
- 14 Heat treating and drying furnaces
- 14.04 Heat treating furnaces and installations
Heat treating furnaces and installations
- 14 Heat treating and drying furnaces
- 14.05 Burners and heaters
Burners and heaters
- 24 Information processing
- 24.07 Engineering services
Engineering services
Our products
Product category: Melting and holding furnaces, electric resistance type
AM-Converter
The AM-converter is a patented device that facilitates rapid melting of ingots, returns and other magnesium solids in a furnace.
The AM-converter can be incorporated in an existing furnace, or integrated into the design of a new melting furnace. It is easy to install and operate.
The AM-converter technology has been successfully tested in melting equipment for diecasting. It is also suitable for a range of other magnesium melting and casting operations.
The AM-converter increases melting rates, significantly reduces melt losses and cover gas consumption, and provides improved health and safety. The formation of sludge is virtually eliminated and production of dross is also significantly reduced.
These features significantly improve the economics of magnesium melting operations.
The AM-converter can be incorporated in an existing furnace, or integrated into the design of a new melting furnace. It is easy to install and operate.
The AM-converter technology has been successfully tested in melting equipment for diecasting. It is also suitable for a range of other magnesium melting and casting operations.
The AM-converter increases melting rates, significantly reduces melt losses and cover gas consumption, and provides improved health and safety. The formation of sludge is virtually eliminated and production of dross is also significantly reduced.
These features significantly improve the economics of magnesium melting operations.
Product category: Melting and holding furnaces, fuel heated
Stationary Degassing Unit
A clean and pure melt is the prerequisite for the production of aluminum castings of high quality.
Impurities in melting can have different causes and leads mainly to strong accumulation of the liquid metal with oxides and hydrogen.
The degassing units of Hindenlang GmbH are used for automatic melt treatment of aluminum alloys and guarantee the highest purity and quality of the melt in a short treatment time.
Impurities in melting can have different causes and leads mainly to strong accumulation of the liquid metal with oxides and hydrogen.
The degassing units of Hindenlang GmbH are used for automatic melt treatment of aluminum alloys and guarantee the highest purity and quality of the melt in a short treatment time.
Product category: Melting and holding furnaces, electric resistance type
Transportable Crucible Furnace Electrically Heated
Transportable furnaces for scooping, melting and holding of light alloys with electrical heating. Mainly used in die-casting machines and in gravity die-castings. The transport takes place by overhead crane or forklift. Automatic connectors allow a smooth transition of the furnaces.
About us
Company details
The Hindenlang GmbH is specialized in planning, manufacturing, supplying, installation and commissioning foundry-technical equipment, especially for non-ferrous metal foundries.
Continuously increasing demands for a higher metal quality, the request to carry out casting processes automatically and faster, while optimising the processes at the same time are taken into consideration when developing future-oriented projects.
A long-standing experience, a lively transfer of know-how, and a highly qualified team of employees are the prerequisite and a solid foundation for this process.
Hindenlang offers their customers products from one source only. Starting with the engineering development and design and the electro-technical planning right up to the development of software, the customer has only one contact partner.
A high level of vertical manufacturing, in the steel construction, refractory lining, producing burner systems particularly developed for the industrial furnace, and own manufacture of controls, offers the customer highly reliable on-schedule delivery dates.
The continuous further development of the products in close cooperation with the customer, in respect of his wishes, ideas and experience, is of a high priority to us, as is the consistent quality control within the overall finishing process.
Continuously increasing demands for a higher metal quality, the request to carry out casting processes automatically and faster, while optimising the processes at the same time are taken into consideration when developing future-oriented projects.
A long-standing experience, a lively transfer of know-how, and a highly qualified team of employees are the prerequisite and a solid foundation for this process.
Hindenlang offers their customers products from one source only. Starting with the engineering development and design and the electro-technical planning right up to the development of software, the customer has only one contact partner.
A high level of vertical manufacturing, in the steel construction, refractory lining, producing burner systems particularly developed for the industrial furnace, and own manufacture of controls, offers the customer highly reliable on-schedule delivery dates.
The continuous further development of the products in close cooperation with the customer, in respect of his wishes, ideas and experience, is of a high priority to us, as is the consistent quality control within the overall finishing process.