Manage stand orders
Select Option

Fondermat S.p.A.

Via Industriale Traversa I, 9, 25060 Cellatica (BS)
Italy
Telephone +39 030 3732490
Fax +39 030 3732477
export@fondermat.it

Hall map

GIFA 2019 hall map (Hall 11): stand H34

Fairground map

GIFA 2019 fairground map: Hall 11

Our range of products

Product categories

  • 10  Casting machines and pouring equipment
  • 10.03  Peripheral equipment and auxiliary materials for die casting (die casting dies see 17.03.01)
  • 10.03.04  Release agents for die-casting

Release agents for die-casting

Our products

Product category: Release agents for die-casting

PISTON LUBRICANTS

FONDERMAT manufactures semi-synthetic and synthetic lubricants for piston lubrication. These products have a lower impact on the environment than lubricants of mineral origin.

The use of dedicated piston lubricants in die-casting machines extends the lifetime of both the piston and its container.

Thanks to their adhesive efficiency, they guarantee constant, optimum lubrication of the piston, without residues or scaling.

Use of these products, combined with one of our automated micro-dosing systems, allows to achieve a constant application of minimum doses, which leads to economic savings in terms of both product and yield, while respecting the environment.

More Less

Product category: Release agents for die-casting

RELEASE AGENTS

  • For perfect release of the casting from the die, FONDERMAT offers the following solutions:
  • FONDEROL line: release agents, synthetic and new-generation semi-synthetic
  • ATOMIZED FLUID®: water-free release agent produced and patented by ATOMIZED FLUID®

MIXING AND MICRO-DOSING SYSTEMS: automatic systems for the perfect balanced mixing of the release agent and for micro-dosing die lubricants

The release agent to be used in die-casting is very important as it must avoid that the molten metal weld to the die. It must aid the release and later extraction of the casting from the die, without there being any changes in size or structure of the piece.

Basically, the release agent must maintain its main characteristics after contact with the molten metal. The main characteristics of a good release agent are:

easing piece ejection from the die
providing a screening function, keeping the molten metal from welding to the die
favouring the flow of molten metal and cavity filling throughout the die
leaving the die clean without any residue

More Less

Product category: Release agents for die-casting

SIST MIX RIO

SIST MIX RIO is an automatic system studied by Fondermat to obtain the dilution of the release agent concentrate in water, with constant, proportional and volumetric dosing.

Thanks to its small size, this system results compact, easy and intuitive, with a very simple management. The unit is equipped with an electrical control panel, where the operator sets the required parameters of release agent’s dilution, and the mixing unit for the dosing and dispensing of the diluted product. Rio can prepare up to 40 l / min of release agent diluted.

More Less

About us

Company details

Forty years of experience and professionalism in the world of foundries and light alloys.

More Less